CL Series

  • Põhiandmed

SKU: d554d551b403 Categories: ,

Description

Residual Capacity at different lifting height

1KG=2.2LB 1INCH=25.4MM

Up to h3 mmACTUAL CAPACITY (Q) kg
25001200800
29001000650
3200800500
Load centre distance (C)mm600700

Smooth travel and lift with excellent controls to reduces product damages and increases productivity.

Lift limit switch operates at maximum lift height to shut off pump motor.

A heavy-duty 24-volt electrical system provides good travel and lift speeds.

High quality hydraulic pump assures very little noise, maximum efficiency and durability.

Drive units is equipped with an electromagnetic brake that is spring applied and electrically release. Brake is activated by the control handle position. The handle ergonmically designed with a raising, lowering and horn bottom.

Speed automatically reduces when driving with the forks at a height of 12″ or higher.

Small turn radius makes it suitable for narrow passage ways.

The CURTIS electronic controller helps provide plenty of low end torgue while increasing the motor and battery lift.

Foot pedal reduces fatigue.

Conforms to EN 1726-1 and EN 1175-1

1KG=2.2LB 1INCH=25.4MM

Identification1.2Manufacturer’s type designationCL1212CL1217CL1226CL1232CL1026CL1032
1.3Drive:electric(battery or mains),diesel, petrol,fuel gas,manualElectric
1.4Type of operation:hand,pedestrian,stand ing,seated, order-picker)Pedestrian
1.5Load Capacity /rated loadQ (t)1.21.0
1.6Load center distanceC mm600
1.8Load distance, centre of drive axle to forkX mm711692
1.9Wheelbasey mm1160
Weights2.1service WeightKg750785860885840865
2.2Axle loading, laden front/rearKg925/1025940/1045980/1080990/1095875/965885/980
2.3Axle loadings, unladen front/rearKg550/200580/205635/225655/230620/220640/225
Wheels?? Chassis3.1Tyres:solid rubber, superelastic, pneumatic, polyurethane)polyurethane
3.2Tyre size, front250×78
3.3Tyre size, rear80×70 1)
3.4Additional wheels(dimensions)150×54
3.5Wheels, number front/rear(x=driven wheels)1x+2/4
3.6Track width,frontb10(mm)685
3.7Track width,rearb11(mm)390/515
Basic Dimensions4.2Lowered mast heighth1(mm)156520751800209518002095
4.3Free lifth2(mm)144144144144
4.4Lift heighth3(mm)111416142514311425143114
4.5Extended mast heighth4(mm)156520752920353029203530
4.9Height of tiller in drive position min./max.h14(mm)985/1365
4.15Lowered heighth13(mm)86
4.19Overall lengthl1(mm)1860
4.20Length to face of forksl2(mm)710
4.21Overall widthb1(mm)805
4.22Fork dimensionss/e/l(mm)60/80/1150
4.25Width over forksb5(mm)570/695
4.32Ground clearance, center of wheelbasem2(mm)50
4.33Aisle width for pallets 1000×1200 crosswaysAst(mm)21262135
4.34Aisle width for pallets 800×1200 lengthwaysAst(mm)20922106
4.35Turning radiusWa(mm)1460
Performance Data5.1Travel Speed, laden/unladenkm/h5.2/5.5
5.2Lift speed, laden/unladenmm/s105/150
5.3Lowering speed, laden/unladenmm/s100/95
5.8Max.gradient performance,  laden/unladen%6/12
5.10Service brakeElectromagnetic
E-Motor6.1Drive motor rating s2 60minkw1.2
6.2Lift motor rating at s3 15%kw2.2
6.3Battery acc. To DIN, no3PZS
6.4Battery voltage, norminal capacityV/Ah24/210
Others8.1Type of drive controlMOSFET Control
8.4Sound level at driver’s ear acc.to EN12053dB(A)67
1)Single wheel F80x93

This specification sheet according to VDI regulation 2198 only provides technical values for the standard truck. Non-standard types, different masts, additional equipment, etc. could produce other values. Right reserved for technical changes and improvements.